MG-Rover.org Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
970 Posts
Discussion Starter #1
Recently removed this from my sons ZT, was running on startup map so covered less that 30 miles.
looking for £1800 or will listen to offers
136245
136246

Wossner forged 9:1 comp pistons
Ductile liners
Forged Turbo Rods
Mahle? heavy duty Main & big end bearings
NOS Crankshaft
N Series upgrade kit
Elastomer head gasket
VVC head with new exhaust valves
Piper solid cam conversion
Hard anodised vernier cam pulleys
380cc Siemens injectors
56mm throttle body
Metal inlet manifold
3 inch downpipe
T28 type Turbo
Billet crank pulley
 

·
Registered
Joined
·
1 Posts
Recently removed this from my sons ZT, was running on startup map so covered less that 30 miles.
looking for £1800 or will listen to offers View attachment 136245 View attachment 136246
Wossner forged 9:1 comp pistons
Ductile liners
Forged Turbo Rods
Mahle? heavy duty Main & big end bearings
NOS Crankshaft
N Series upgrade kit
Elastomer head gasket
VVC head with new exhaust valves
Piper solid cam conversion
Hard anodised vernier cam pulleys
380cc Siemens injectors
56mm throttle body
Metal inlet manifold
3 inch downpipe
T28 type Turbo
Billet crank pulley
Recently removed this from my sons ZT, was running on startup map so covered less that 30 miles.
looking for £1800 or will listen to offers View attachment 136245 View attachment 136246
Wossner forged 9:1 comp pistons
Ductile liners
Forged Turbo Rods
Mahle? heavy duty Main & big end bearings
NOS Crankshaft
N Series upgrade kit
Elastomer head gasket
VVC head with new exhaust valves
Piper solid cam conversion
Hard anodised vernier cam pulleys
380cc Siemens injectors
56mm throttle body
Metal inlet manifold
3 inch downpipe
T28 type Turbo
Billet crank pulley
What other car can this fit in?
 
1 - 2 of 2 Posts
Top